Extraordinary-facts.comDo you know thatHow to change a mobile home kitchen faucet ?

How to change a mobile home kitchen faucet ?

Unlike home plumbing materials, several manufacturers use rigid plastic fittings for mobile home kitchen faucets. These fittings can regularly crack at the ends and cause water leaks in the kitchen of your mobile home. Here are some simple instructions for replacing the kitchen faucet in your mobile home in the event of a breakdown.

Precaution to take before changing the kitchen faucet on your mobile home

The first step in replacing the kitchen faucet in your mobile home is to turn off the water supply. The water cut-off device is generally located at the water heater or under the mobile home. Once the power is off, you should also remember to depressurize the water lines so as not to be sprayed with water during the dismantling of the old faucet. This can be done by opening the external tap until it empties completely.

Remove the old kitchen faucet from your mobile home

To dismantle the old faucet, it is necessary to unscrew the mounting nuts and those of the water pipes. Usually made of plastic, they can be unscrewed with bare hands or with pliers or an adjustable wrench. Then, you have to separate the control rod from the bung. To do this, you need a screwdriver to unscrew the screw that connects it to the ball joint. Once unscrewed, you can remove the control rod from the drain by pulling it up.

After disassembly, remove the fiber gaskets and clean the entire location of the faucet. Also, remove dirt and limescale that may have accumulated there over time with a cleaning product such as white vinegar.

Finally, check if the type of plumbing used in the kitchen of your mobile home is polybutylene and if the pipes are flexible enough. Indeed, if your pipes are rigid, they could require you to make adjustments to the water pipes during assembly.

Buy the replacement kit at a DIY store

Since the taps of mobile homes are not identical to those that are generally used, it is prudent to bring the kit disassembled so as not to make a mistake when purchasing. This will give you the chance to find exactly one identical part which will be easier for you to reassemble. Remember to also bring the dismantled gaskets to the plumbing store and show them to a specialist. If they are already worn, they will need to be replaced with an identical seal model.

Reassemble the new kitchen faucet of your mobile home

Connect the water lines to the new faucet. If the connection requires adjustment, some adjustments will need to be made. To do this, it is necessary to use push-fit fittings. Easy to assemble, they are versatile and can be used with several types of pipes. However, if adjustments are not necessary, simply tighten the water lines.

Once this step is completed, you can turn on the water supply and the tap to verify that there are no leaks. If this happens, strengthen the seal at the joints by using fiber gaskets.